Serial LCD Annunciator

Product Code: FN-LCD-S

The FN-LCD-S serial annunciator provides a convenient and cost effective remote annunciator solution. Up to 15 FN-LCD-S annunciators can be connected to the slave RS-485 port of the FireNET control panel or network annunciator. The FN-LCD-S’s large 320 character display and navigation buttons area complete mimic of the FireNET control panel display. The use of a common interface allows theuser to easily operate the FN-LCD-S as if he were operating the FireNET control panel directly.Security is established by the use of a password or firefighters enable key. Designed to be aestheticallypleasing, the FN-LCD-S is available in charcoal grey or red enclosures. The FN-LCD-S can be surface orflush mounted without the need for a trim ring.

FN-LCD-S Serial LCD Annunciator Hochiki – FireNET

Hochiki – FireNET®	Serial LCD Annunciator FN-LCD-S
Current Draw – Standby	20mA @ 24VDC
Current Draw – Alarm	110mA @ 24VDC
Dimensions – FN-LCD-S	10.88” W x 8.00” H x 1.38” D
Dimension – Back Box	10.38” W x 7.38” H x 1.25” D
Weight	3.5 lbs
Color	Red (optional gray)
Material	ABS/steel enclosure
Operating Temp.	32° F (0° C) 120° F (49° C)
Relative Humidity	85% RH Non-Condensing
Display	8 line x 40 character LCD (320 characters total)
Network	RS485 port

Specifications subject to change without notice.

• UL 864 9th edition Listed
• Large 320 character liquid crystal display (8 line x 40 character) allows viewing of system status
• LED indicators for Fire, Supervisory Alarm, Pre-Alarm, Fire Output Active, AC Power On, On Test, Panel Sounder Silenced, Delay Active, More Events, Point Bypassed, General Trouble, Power Trouble, System Trouble & NAC Trouble
• Same controls as the FireNET fire panel (Reset, Panel Sounder Silence, Lamp Test, AlarmSilence, Re-sound Alarm, Fire Drill, Programmable Function, More Events, More Fire Events, Enter & Exit)
• Up to 15 FN-LCD-S serial annunicators may be connected to a FireNET control panel or network annunciator
• Resides on the FireNET slave RS-485 line
• Local piezo sounder for event notification
• Supports user codes & firefighter key to enable access & controls
• Powered by FireNET Aux 24VDC or UL fire listed Aux. 24VDC supply
• Available in red or charcoal, and can be surface or flush mounted
• Built-in help & alarm information screens
• Fire drill function

• UL 864, Listed – S8255
• Local Signaling Listed – S5694
• CSFM Listed – 7120-0410:165
• NFPA 70, 72 &13 Compliant
• FM Approved – 3033817
• ISO 9001-2008

	FN-LCD-S Serial LCD Annunciator Datasheet