FORGOT YOUR DETAILS?

HOTLINE CALL?   081 1250 8699

Photoelectric Smoke Detector Notifier FSL-751

Photoelectric Smoke Detector Notifier FSL-751

Photoelectric Smoke Detector Notifier FSL-751

The FSL-751 is a High sensitivity photoelectric detector for use with ONYX Series panels.

Our photoelectric detector’s unique optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources. Intelligent (addressable) detectors include point ID capability that enable each detector address to be set with rotary address switches to provide exact detector locations. The sensitivity can be programmed using the control panel software to suit the environment. In addition, detector sensitivity is continually monitored and reported to the panel.

Categories: , , , Tags: , ,

Description

 

Specifications

 Notifier® by Honeywell      Photoelectric Smoke Detector
 Product Type  FSL-751
 Operating temperature  0° to 38°C (32° to 100°F)
 Rotary address switches for point identification and quick installation
 Dual LEDs for 360° visibility
 Relative Humidity  10% – 93% noncondensing
 Size  2.0″ (51 mm) high; base determines diameter
 – B210LP(A): 6.1″ (15.5 cm) diameter
 – B501(A): 4.1″ (10.4 cm) diameter
 – B200S(A): 6.875″ (17.46 cm) diameter.
 – B200SR(A): 6.875″ (17.46 cm) diameter.
 – B224RB(A): 6.2″ (15.748 cm) diameter.
 Electrical Specifications
 Operating voltage range  15 to 32 VDC peak
 Maximum average standby current  230 A @ 24 VDC (no communication). 330 A @ 24 VDC
 (one communication every 5 seconds with LED blink enabled).
 Maximum alarm current  6.5 mA @ 24 VDC (LED “ON”).
 Specifications subject to change without notice.

 

Features :

• Very Intelligent Early Warning (VIEW®) smoke detection
• Advanced laser light source and patented optical design
• Sleek low-profile housing (1.66″/42.164 mm height)
• Sensitivity :
– 0.03% to 1.00% for CLIP systems
– 0.02% to 2.00% for all other panels
• Rotary, decimal addressing (1-99 on CLIP systems, 1-159 on FlashScan systems)
• Dual bi-color (red/green) LEDs flash green when Normal and are steady red in Alarm
• Compatible with the AFP-300, AFP-400, NFS-640, NFS2-640, NFS-320, NFS-3030, and NFS2-3030 (all software releases)
• Dual LED design provides 360° viewing angle
• Built-in magnetic test switch, or automatic test commanded from panel
• Optional remote, single-gang LED accessory, RA100Z(A)
• Optional relay, isolator, or sounder bases

 

Agency Listings and Approvals :

• UL Listed: S1115
• ULC Listed: S1115
• MEA Listed: 128-07-E (NFS2-640, NFS-320); 3-02-E
• FM Approved
• CSFM: 7272-0028:0218
• BSMI: CI313066760036
• CCCF: Certif. # 2004081801000015
When used with NFS2-640/NFS-320, MARINE-EQ, and appropriate seismic bracket, these detectors are approved by the following agencies :
– U.S. Coast Guard: 161.002/50/0 (Standard 46 CFR).
– Lloyd’s Register: 11/600013 (ENV 3 category).

 

Related products

TOP